Funct. Mater. 2016; 23 (4): 636-643.
Flexible impulse response of the multi-bar linkage with heavy load
School of Mechanical Engineering, Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou, Henan, 450015, P.R. China
It is based on the advantages of virtual prototyping technology, the dynamics mathematic model was established for the large mechanism by applying multi body dynamics theory. In order to adapt the users to special request of the strip width size, appeared the continuous casting and continuous rolling technology, and greatly reduce the width types of continuous casting. The components of the equipments are often considered the rigid body. The precision is not high premise in the process of work, usually the parts works as elastic under the high speed and the heavy load, neglects various components the elastic function will cause the result error, even will be wrong. Studied analysis dynamic characteristic of the adjustment width machine, and analyzed the component in detail for the rigid body or the elastic. The results provide the theoretically support to work out adjustment the width potentialities and strength analysis of the key parts.
1. Yuli Liu, Won-Ho Lee. ISIJ International, 45, 1173, 2005. https://doi.org/10.2355/isijinternational.45.1173
2. Z Y Jiang, W P Hu. Mater Process Techn, 102, 70, 2000. https://doi.org/10.1016/S0924-0136(00)00446-5
3. Jinying Zhang, Jian Wen, Wei Huang. Coal Mine Mach, 11, 130, 2005.
4. Mannbu Kill C.H.I, Jim Yanagumoto ISIJ intern, 30, 142, 1990. https://doi.org/10.2355/isijinternational.30.142
5. Xiong Shangwu, Liu Xianghua, Wang Guodong, et al. J Mater Eng perform, 6, 1757, 1997. https://doi.org/10.1007/s11665-997-0078-0
6. Zhiwu Han, Cai Liu, Weiping Lu. J Mater Proces Techn, 13, pp. 36, 2006.
7. Takeuchi M, Hirate O, Hoshiya M, et al. Heavy width reduction rolling technology of hot slabs. In Nippon Steel Corporation EDS. Seitetsu, No.310. Tokyo: Published by Technical Planning & Development Coordination Div Technical Administrator Bureau, Nippon Steel corporation, 1982, pp. 295-306.
8. Liu Cai, Zhang Lele, Han Zhiwu, et al. A flow model of finite strip for simulation of cold roll-forming of tubes. Boflou J R, eds. SheMei 2001 conference, Belgium: Katbolieke University Leuven, 2001, pp. 579-586.
9. Marghitu D B. Guran A. The dynamics of a flexible beam with a lubricated prismatic kinematic pair. Journal of Vibration and Acoustics, Trans. Of the ASME, 1998, pp. 880-885.
10. Seong H K, Chul H, Hyun C P, et al. Vibration control of an arc type shell using active constrained layer damping. Smart Materials and Structures, 2004, vol. 13, no. 2, pp. 350-354. https://doi.org/10.1088/0964-1726/13/2/013
11. Shyu S C, Chang T Y P and Saleeb A F. Method. Comp Struct. 32, 223, 1989. https://doi.org/10.1016/0045-7949(89)90088-6
12. X.Jin. Experimental and Theoretical Study on the Continuous Rolling Process of H-beam, Dissertation of the Master Degree in Engineering, Yanshan University,1990, pp. 20-70.
13. Chunhua XU, Minglian ZHOU, Xianni LI. Consumption calculation and experimental study of pneumatic gear motor. Chinese Hydraulics & Pneumatics, 2007, no. 2, pp. 4-7.
14. SHI Rong, LIU Cai, LI Xuming, et al. J Mech Eng, 6, 34, 2006.
15. Ligang Yao, Jian S. Dai, Guowu Wei. J. Mech Design, Transaction of the ASME, 128, 610, 2006. https://doi.org/10.1115/1.2179460
16. Liu Yajun, Yang Zhuoru, Wan Zhenping, Tang Yong, Wang Wei. J South China Unive Techn (Natur Scie Edit), 32, 61, 2004.
17. F. L. Litvin, G. Argentieri, etc. Comput. Meth Appl. Mech. Eng, 3, 785, 2000. https://doi.org/10.1016/S0045-7825(99)00329-1
18. Xiaopin Liu, Hui Shi, and Zhenqiang Mao, J Commun, 27, 24, 2006.
19. Zhou Hai Qing, Zhang Ping. J Propul Techn, 25, 477, 2004.
20. Li Yong, Zheng Jianrong, Tang Weifeng. Trans Chinese Soc Agricultl Eng, 1, 1, 2005.