Funct. Mater. 2018; 25 (4): 829-834.

doi:https://doi.org/10.15407/fm25.04.829

Investigation of corrosion fatigue cracks of steel under wetting and drying conditions

Lihua Liang

Qingdao Technical College, No. 369, Qiantangjiang Road, Huangdao district, Qingdao, Shandong 266555, China

Abstract: 

The results demonstrated that dry/wet ratio and loading frequency could significantly affect the growth rate of the corrosion fatigue cracks of steel structure. The effects of dry/wet ratio on the growth rate of cracks became smaller with the increase of the amplitude of stress intensity factor under the same loading frequency. The effects of dry/wet ratio on the growth rate of cracks became smaller with the increase of loading frequency under the same dry/wet ratio.

Keywords: 
corrosion fatigue, D36 steel, dry/wet ratio, crack growth.
References: 

1. W. Liu, R. G. Hunsperger, M. J. Chajes, et al., J. Mater. Civil Engin., 14, 217 (2015). https://doi.org/10.1061/(ASCE)0899-1561(2002)14:3(217)

2. J M Bastidas, E M Mora, S. Feliu, Mater. Corros., 41, 343,(2015).

3. D. Zhang, Y. Tang, S. Qi et al., Corros. Sci., 102, 517 (2016). https://doi.org/10.1016/j.corsci.2015.10.002

4. F. Stern, Z. Wang, J. Yang et al., J. Hydrodyn., 27, 1 (2015). https://doi.org/10.1016/S1001-6058(15)60452-8

5. P. Rajala, L. Carpen, M. Vepsalainen, M. Raulio, et al., Front. Microbiol., 6, 647 (2015). https://doi.org/10.3389/fmicb.2015.00647

6. B. N. Grgur, A. R. Elkais, M. M. Gvozdenovic et al., Prog. Org. Coat., 79, 17 (2015). https://doi.org/10.1016/j.porgcoat.2014.10.013

7. M. Mehdipour, B. Ramezanzadeh, S. Y. Arman, J. Ind. Eng. Chem., 21, 318 (2015). https://doi.org/10.1016/j.jiec.2014.02.041

8. M. Dudukcu, Mater. Corros., 62, 264 (2015). https://doi.org/10.1002/maco.200905524

9. J. Tong, K. Zhang, S. Lin. W. Wang, Trans. China Weld. Inst., 2015.

10. W. Morgner, C. Schnitger, et al. 46 (2017).

11. T. Abe, Key Eng. Mater., 725, 226 (2016). https://doi.org/10.4028/www.scientific.net/KEM.725.226

12. A. Indriani, Y. Witanto, A. S. Pratama et al., Mater. Sci. Eng. Confer. Series, 012022 (2018).

13. V V. Usov, E E. Gopkalo, N. M. Shkatulyak et al., Metallurgiya, 2015 759 (2015).

14. Q. Dai, L. Meng, Z. Liang, J. J. Wu, et al., Trans. China Weld. Inst., (2015).

15. H. Miyazaki, Y. Zhou, S. Iwakiri, H. Hirotsuru, et al., Ceramics Int., (2018)

.

Current number: