Funct. Mater. 2019; 26 (2): 366-374.
Liquid steel interaction with MgO-based refractories: A Review
1School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing (USTB), 100083 Beijing, P.R. China
2Department of Applied Chemistry, University of Aleppo, Aleppo, Syria
3Ferrous Metallurgy Research Institute (FeMRI), Mexico
The mechanisms of reaction between MgO-based refractories and liquid steel are considered. Conditions are analyzed the formation of a spinel layer at the interface between liquid steel and refractory, the dissolution of refractory materials in liquid steel.
1. N.Sutucliffe, in: Proc. Int. Conf. on Molten Slags Fluxes and Salts. VII (2004), p.423.
2. S.Riaz, A.Cederlund-losenborg, K.C.Mills, K.Bain, in: Proc. 6th Intern. Conf. on Molten Slags, Fluxes and Salts (2000), p.6.
3. G.J.Hassall, K.G.Bain, N.Jones, M.O.Warman, Ironmak. Steelmak., 29, 383 (2002). https://doi.org/10.1179/030192302225005196
4. P.T.Jones, B.Blanpain, P.Wollants et al., Proc. 6th Intern. Conf. Molten Slags, Fluxes and Salts. Dept..Mater. Scie. Engin., KTH, Sweden, (2000).
5. K.Beskow, N.N.Tripathi, M.Nzotta et al., Ironmak. Steelmak, 31, 514 (2004). https://doi.org/10.1179/030192304225019360
6. S.A.Nightingale, B.J.Monaghan, G.A.Brooks, Metal. Mater. Trans. B, 36, 453 (2005). https://doi.org/10.1007/s11663-005-0036-x
7. F.Cirilli, D.A.Di, P.Dupel, P.Guillo, in: Proc. 6th Intern. Conf. Molten Slags, Fluxes and Salts (2000).
8. V.Brabie, Steel Res., 68, 54 (1997). https://doi.org/10.1002/srin.199700542
9. S.Yoshino, H.Kyoden, Y.Namba, Iron Steelmaker, 7, 16 (1980).
10. L.A.Moiseeva, B.P.Moiseev, Steel in Translation, 37, 607 (2007). https://doi.org/10.3103/S0967091207070133
11. J.H.Park, D.S.Kim, Metal. Mater. Trans. B, 36, 495 (2005). https://doi.org/10.1007/s11663-005-0041-0
12. M.Jiang, X.Wang, J.Pak, P.Yuan, Metal. Mater. Trans. B, 45, 1656 (2014). https://doi.org/10.1007/s11663-014-0095-y
13. A.Harada, G.Miyano, N.Maruoka et al., ISIJ Int., 54, 2230 (2014). https://doi.org/10.2355/isijinternational.54.2230
14. H.Matsuno, Y.Kikuchi, Tetsu-to-Hagane, 88, 48 (2002). https://doi.org/10.2355/tetsutohagane1955.88.1_48
15. H.Itoh, M.Hino, S.Ban, Tetsu-to-Hagane, 84, 85 (1998). https://doi.org/10.2355/tetsutohagane1955.84.2_85
16. G.Okuyama, K.Yamaguchi, S.Takeuchi, K.Sorimachi, ISIJ Int., 40, 121 (2000). https://doi.org/10.2355/isijinternational.40.121
17. Y.Sun, Y.Zeng, R.Xu, K.Cai, Int. J. Miner. Metal., Mater., 21, 1068 (2014). https://doi.org/10.1007/s12613-014-1011-9
18. Z.Deng, M.Zhu, S.Du, Metal. Mater. Trans. B, 47, 1 (2016).
19. J.Yang, T.Yamasaki, M.Kuwabara, ISIJ Int., 47, 699 (2007). https://doi.org/10.2355/isijinternational.47.699
20. Y.G.Chi, Z.Y.Deng, M.Y.Zhu, Steel Res. Int., 88, 1600470 (2017). https://doi.org/10.1002/srin.201600470
21. Z.Deng, M.Zhu, ISIJ Int., 53, 450 (2013). https://doi.org/10.2355/isijinternational.53.450
22. L.Kong, Z.Deng, M.Zhu, ISIJ Int., 57, 1537 (2017). https://doi.org/10.2355/isijinternational.ISIJINT-2017-118
23. L.Kong, Z.Deng, M.Zhu, Metall. Mater. Trans. B, 47, 3158 (2016). https://doi.org/10.1007/s11663-016-0746-2
24. N.Verma, P.C.Pistorius, R.J.Fruehan et al., Metal. Mater. Trans. B, 43, 830 (2012). https://doi.org/10.1007/s11663-012-9660-4
25. G.Ruan, N.Li, Ironmak. Steelmak, 31, 342 (2004). https://doi.org/10.1179/030192304225018091
26. J.Elliott, Electric Furnace Proceedings, 29, 12 (1971),
27. G.D.Pickering, J.D.Batchelor, Amer. Ceram. Soc. Bull., 50, 611 (1971).
28. S.Jansson, V.Brabie, P.Jonsson, Ironmak. Steelmak., 35, 398 (2006).
29. N.Ahmadi, M.Hirasawa, M.Sano, ISIJ Int. , 36, 1366 (1996). https://doi.org/10.2355/isijinternational.36.1366
30. F.Cirilli, M.Tonelli, Steel Res. Int., 77, 250 (2006). https://doi.org/10.1002/srin.200606382
31. A.Watanabe, H.Takahashi, F.Nakatani, J. Amer. Ceram. Soc., 69, C (1986).
32. C.Liu, F.Huang, J.Suo, X.Wang, Metall. Mater. Trans. B, 47, 989 (2016). https://doi.org/10.1007/s11663-015-0540-6
33. C.Liu, X.Gao, S.Kim, S.Ueda, S.Kitamura, ISIJ Int., 58, 488 (2018). https://doi.org/10.2355/isijinternational.ISIJINT-2017-593
34. O.D.Kwon, C.H.Yim, C.H.Rhee, in: UNITECR'01. Proc. Unified Int. Tech. Conf. on Refractories. 7th Biennial Worldwide Congress, 1, 252 (20010)
35. Y.Lee, S.Jung, D.Min, Ironmak. Steelmak., 41, 213 (2014). https://doi.org/10.1179/1743281213Y.0000000120
36. K.Sasai, Y.Mizukami, ISIJ Int., 40, 40 (2000). https://doi.org/10.2355/isijinternational.40.40
37. J.Simoes, D.Janssen, CFI, GOLLER VERLAG GMBH ASCHMATTSTRASSE 8, D-76532 BADEN BADEN, Germany, 85, E86 (2008).
38. M.Mantovani, L.Moraes, R.Leandro da Silva et al., Ironmak. Steelmak., 40, 319 (2013). https://doi.org/10.1179/1743281212Y.0000000035
39. H.Jungblut, T.Scherrmann, in: Proc. of 3rd European Conference on Continuous Casting, Madrid (1988), p.707.
40. N.Bannenberg, H.Lachmund, METEC Congress 94. 2nd European Continuous Casting Conference. 6 th International Rolling Conference, 1, 25 (1994).
41. A.Alhussein, P.R.Scheller, W.Yang, Metall. Res. Technol., 115, 1 (2018). https://doi.org/10.1051/metal/2018079
42. H.Li, Y.Wei, Br. Ceram. Trans., 102, 175 (2003). https://doi.org/10.1179/096797803225004963
43. J.Lehmann, M.Boher, M.Kaerle, CIM Bull., 90, 69 (1997).
44. M.Guo, M.Van Ende, P.T.Jones et al., in: Proc. of AIST Proceedings, Association for Iron and Steel Technology, 2, 621 (2009).
45. P.Yan, M.Van Ende, E.Zinngrebe et al., ISIJ Int., 54, 2551 (2014). https://doi.org/10.2355/isijinternational.54.2551
46. N.Bannenberg, in: Proc. of UNITECR'95 Proceedings, 1, 37 (1995). https://doi.org/10.1093/aristotelian/95.1.37
47. Y.Wei, L.Nan, X.Chen et al., J. Iron Steel Res. Int., 15, 92 (2008). https://doi.org/10.1016/S1006-706X(08)60133-8
48. Y.Wei, C.Weiqing, Y.Yindong et al., in: Proc. of AISTech 2015 Proceedings (2015), p.2162.
49. S.Taira, K.Nakashima, K.Mori, ISIJ International, 33, 116 (1993). https://doi.org/10.2355/isijinternational.33.116
50. S.Y.Kitamura, H.Shibata, N.Maruoka, Steel Res. Int., 79, 586 (2008). https://doi.org/10.1002/srin.200806170
.